AEG 231GR-M Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня AEG 231GR-M. AEG 231GR-M 21 сторінка. Ceramic griddle
Також для AEG 231GR-M: Інструкція з експлуатації (16 сторінок), Інструкція з експлуатації (16 сторінок), Інструкція з експлуатації (11 сторінок)

Installation

Caution: In order to avoid a hazard this

appliance must be installed according to

these instructions for installation

The appliance unit can be mounted in

any type of kitchen with a work top

whose thickness is between 28 mm and

40 mm.

Clearance

The distance between the top side of the

work top and the carpentry underneath

must be at least 47 mm.

Fixing

Screw the fixing brackets out to such an

extent that they can be turned in under

the work top. Tighten the brackets on to

the work top with an ordinary

screwdriver.

Cut-out measurements

One rectangular hole is sawn out for the

appliance combination chosen.

The depth of the cut-out for any unit is:

490 mm

Length of hole = sum of all units`

externally measured length, less 20 mm.

Mounting of Reinforcement

Beams

A reinforcement Beam, with supporting

flanges at each end, is included with

each two-burner unit. For unit

combinations, a reinforcement beam

must be used between each unit.