Brother MFC-J6520DW Посібник з швидкого налаштування - Сторінка 24

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Принтер "Все в одному Brother MFC-J6520DW. Brother MFC-J6520DW 45 сторінок. Brother all in one printer
Також для Brother MFC-J6520DW: Посібник з техніки безпеки (21 сторінок), Посібник з безпеки продукції (20 сторінок), Посібник з безпеки продукції (25 сторінок), Посібник з техніки безпеки (20 сторінок)

Wired Network

For Macintosh wired network interface users

(Mac OS X v10.6.8, 10.7.x, 10.8.x)

Before you install

Make sure your machine is connected to the power

and your Macintosh is ON. You must be logged on

with Administrator rights.

NOTE

• For Mac OS X v10.6.0 to 10.6.7 users, upgrade

to Mac OS X v10.6.8 - 10.8.x.

• If you have previously set up your machine for

a wireless network and then want to set it up on

a wired network, make sure the machine's

Network I/F is set to Wired LAN. The

wireless network interface will become inactive

with this setting.

On your machine, press

Press All Settings.

Press a or b to display Network.

Press Network.

Press a or b to display Network I/F.

Press Network I/F.

Press Wired LAN.

Press

Connect the network

cable

Lift the scanner cover until it locks securely into

the open position.

(Settings).

Connect the network cable to the Ethernet port

marked with a

Ethernet port inside the machine, as shown in

the callout below. Remove the orange

protective cap b before connecting the cable.

Carefully guide the network cable into the cable

channel and out the back of the machine.

Connect the cable to your network.

IMPORTANT

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

NOTE

If both the USB and the network cables are being

used, guide both cables through the cable

channel with one on top of the other.

Macintosh

symbol a. You will find the