Brother MFC-J6940DW Посібник з безпеки продукції - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з безпеки продукції для Принтер "Все в одному Brother MFC-J6940DW. Brother MFC-J6940DW 23 сторінки.
Також для Brother MFC-J6940DW: Посібник з безпеки продукції (23 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник з швидкого налаштування (2 сторінок)

12. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to

ensure reliable operation of the product and to protect it from overheating, these openings

must not be blocked or covered. The openings should never be blocked by placing the

product on a bed, sofa, rug, or other similar surface. This product should never be placed

near or over a radiator or heater. This product should not be placed in a built-in installation

unless proper ventilation is provided.

13. Do not place anything in front of the product that will block printouts. Do not place anything in

the path of received faxes.

14. DO NOT touch a document during printing.

15. Not all telephones will respond to incoming ringing when connected to the extension socket.

(Models with FAX function only)

Models with FAX function only

1. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has

accepted that the item complies with minimum conditions for connection to its network. It

indicates no endorsement of the product by Telecom, nor does it provide any sort of

warranty. Above all, it provides no assurance that any item will work correctly in all respects

with another item of Telepermitted equipment of a different make or model, nor does it imply

that any product is compatible with all of Telecom's network services.

2. This equipment does not fully meet Telecom's impedance requirements. Performance

limitations may occur when used in conjunction with some parts of the network. Telecom will

accept no responsibility should difficulties arise in such circumstances.

3. This equipment should not be used under any circumstances which may constitute a

nuisance to other Telecom customers.

4. This equipment shall not be set up to make automatic calls to the Telecom "111" Emergency

Service.

5. This equipment is not capable, under all operating conditions, of correct operation at the

higher speeds for which it is designed. Telecom will accept no responsibility should

difficulties arise in such circumstances.

6. Some parameters required for compliance with Telecom's Telepermit requirements are

dependent on the equipment (PC) associated with this device. The associated equipment

shall be set to operate within the following limits for compliance with Telecom's

Specifications:

• There shall be no more than 10 call attempts to the same number within any 30 minute

period for any single manual call initiation.

• The equipment shall go on-hook for a period of not less than 30 seconds between the end

of one attempt and the beginning of the next call attempt.

• Automatic calls to different numbers are spaced such that there is no less than 5 seconds

between the end of one call attempt and the beginning of another.

• Equipment shall be set to ensure that calls are answered between 3 and 30 seconds of

receipt of ringing.

7. Many CPE devices have features such as "last number redial" or "memory dial" which

depend on a small on-hook line current for the maintenance of memory information. Such

terminal devices used with the series connected device may lose their memory functions.

8. Telepermitted equipment only may be connected to the EXT telephone port. This port is not

specifically designed for 3-wire-connected equipment. 3-wire-connected equipment might

not respond to incoming ringing when attached to this port.