Brother MFC-J805DW Довідковий посібник - Сторінка 19

Переглянути онлайн або завантажити pdf Довідковий посібник для Принтер "Все в одному Brother MFC-J805DW. Brother MFC-J805DW 28 сторінок. Brief explanations for routine operations
Також для Brother MFC-J805DW: Посібник з швидкого налаштування (2 сторінок)

Друкувати сторінку

Error and Maintenance Messages

The most common error and maintenance messages are shown in the table. For more detailed

information, see the Online User's Guide.

You can correct most errors and perform routine maintenance yourself. If you need more tips, go

to your model's FAQs & Troubleshooting page on the Brother Solutions Center at

support.brother.com.

Error Message

Absorber NearFull The ink absorber box must be replaced soon. Call Brother Customer

B&W Print Only

Replace Ink

Cannot Detect

Cannot Detect Ink Use a new Genuine Brother Ink Cartridge. If the error is not cleared,

Data Remaining

Action

Service or a Brother Authorized Service Center to have your machine

serviced.

• The ink absorber box absorbs the small amount of ink emitted

during print head cleaning.

One or more of the color ink cartridges have reached the end of their

lives.

Replace the ink cartridges.

For more detailed information, see the Online User's Guide: Replace

the Ink Cartridges.

The machine will stop all print operations and you will not be able to

use the machine until you install a new ink cartridge in the following

cases:

• If you unplug the machine or take out the ink cartridge.

• If you select the Slow Drying Paper option on the machine or in

the printer driver.

Remove the used ink cartridge and install a new one.

Use a new Genuine Brother Ink Cartridge. If the error is not cleared,

call Brother Customer Service.

Take out the new ink cartridge and reinstall it slowly and firmly until it

locks into place.

For more detailed information, see the Online User's Guide: Replace

the Ink Cartridges.

Check the model numbers of the ink cartridges and install the correct

ink cartridges.

See Related Information: Supply Specifications at the end of this

section.

call Brother Customer Service.

Press Stop/Exit. The machine will cancel the job and clear it from the

memory. Try to print again.