AEG 35772G-M Інструкція з експлуатації - Сторінка 17

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня AEG 35772G-M. AEG 35772G-M 25 сторінок.

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified

electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be

observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that

indicated on the hob rating plate. The rating plate is located on the bottom of the

hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 13 amp plug

fitted. In the event of having to change the fuse, a 3amp ASTA approved (BS 1362)

fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains lead are

coloured in accordance with the following code:

Green and Yellow

Blue

Brown

1) Connect the green and yellow (earth) wire

to the terminal in the plug which is marked

with the letter 'E' or the earth symbol

coloured green and yellow.

2) Connect the blue (neutral) wire to the terminal

in the plug which is marked with the letter 'N' or coloured black.

3) Connect the brown (live) wire to the terminal in the plug which is marked with the

letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord

clamp must be secure over the outer sheath.

In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must

be used.

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of safely.

- Earth

- Neutral

- Live

FO 0390