Brother MFC-L2700DN Посібник з швидкого налаштування
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Принтер "Все в одному Brother MFC-L2700DN. Brother MFC-L2700DN 2 сторінки.
Також для Brother MFC-L2700DN: Посібник з швидкого налаштування (2 сторінок), Як замінити барабанний блок (12 сторінок)
Друкувати сторінку
DCP‑L2500D / DCP‑L2520D / DCP‑L2520DW / DCP‑L2540DN /
DCP‑L2540DW / DCP‑L2541DW / MFC‑L2700D / MFC‑L2700DN /
MFC‑L2700DW / MFC‑L2701D / MFC‑L2701DW / MFC‑L2703DW
Quick Setup Guide
Unpack the machine and check the components
A
Drum Unit
(Pre‑installed)
B
Inbox Toner
Cartridge
1
Remove the packing materials and install the toner cartridge
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
Back
Select your language (If needed)
5
(Only for certain models)
1.
(DCP model)
a. Press Menu.
b. Press ▲ or ▼ to display General Setup, and then press OK.
c. Press ▲ or ▼ to display Local Language, and then press OK.
(MFC model) Press Menu, 0, 0.
2.
Press ▲ or ▼ to select your language, and then press OK.
3.
Press Stop/Exit.
6
Connect the machine to your computer/mobile device
• Windows
PC with a CD‑ROM drive, go to step
®
• Windows
PC without a CD‑ROM drive, go to step
®
• Macintosh, go to step
6B
• Mobile device users with a WPS/AOSS™‑supported access point/router, go to step
AC Power Cord
Quick Setup Guide
(only for certain
models)
(For U.K.)
(For Others)
Telephone Line Cord
Product Safety Guide
(For MFC models)
Remove the orange part.
Adjust the paper guides.
Front
6A
6B
Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Watch our FAQ Videos for help with setting up your
Brother machine: solutions.brother.com/videos.
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct
installation procedure.
NOTE:
• The components included in the box and the AC power plug may differ depending on your
country.
CD‑ROM
• The illustrations in this Quick Setup Guide are based on the MFC‑L2700DW.
• You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long.
Network cable
Use a straight‑through Category 5 (or greater) twisted‑pair cable for 10BASE‑T or
100BASE‑TX Fast Ethernet Network.
Basic User's Guide
(only for certain
Secure Network Access
models)
Your machine's default password is on the label on the back of the machine (preceded by
"Pwd").
We strongly recommend you change it to protect your machine from unauthorised
access.
B
A
Remove the orange part.
Select your country/language
4
(Initial setup only)
After turning on the machine, you may be required to set your
country or language (depending on your machine).
If required, follow the on‑screen instructions.
6C
D01JBT001‑01
UK
Version D
A
B
B
A