AEG 6000 Series Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня AEG 6000 Series. AEG 6000 Series 24 сторінки.
Також для AEG 6000 Series: Посібник користувача (12 сторінок), Посібник користувача (24 сторінок), Посібник користувача (24 сторінок)
Друкувати сторінку
The wires in the cord are coloured as
follows:
Green and yellow
Blue
Brown
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
shock hazard. Ensure that
the cut off plug is disposed
of safely.
3.7 Replacement of the
connection cable
The replacement of electric
cable must be carried out
exclusively by the service
force centre or by personnel
with similar competencies, in
accordance with the current
regulations.
To replace the connection
cable use only H03V2V2-F
T90 or equivalent type.
Make sure that the cable
section is applicable to the
voltage load and the
working temperature. The
yellow/green earth wire (B)
must be approximately 2 cm
longer than the live and
neutral wire (A).
1. Connect the green and yellow (earth)
wire to the terminal which is marked
with the letter 'E', or the earth
- Earth
- Neutral
- Live
A
B
symbol
, or coloured green and
yellow.
2. Connect the blue (neutral) wire to the
terminal which is marked with the
letter 'N' or coloured blue.
3. Connect the brown (live) wire to the
terminal which is marked with the
letter 'L'. It must always be
connected to the network phase.
There must be no cut or stray strands
of wire present. The cord clamp must
be correctly attached to the outer
sheath.
3.8 Assembly
1.
2.
3.
min. 600 mm
min. 150 mm
min. 55 mm
30 mm
2
+
0
4.
ENGLISH
11
min. 650 mm
+
2
560 mm
0