Brother MFC-L2740DW Інструкція по поповненню

Переглянути онлайн або завантажити pdf Інструкція по поповненню для Принтер "Все в одному Brother MFC-L2740DW. Brother MFC-L2740DW 8 сторінок. Brother mfps & printers product safety guide
Також для Brother MFC-L2740DW: Посібник з безпеки продукції (23 сторінок), Посібник з безпеки продукції (26 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник з швидкого налаштування (2 сторінок), Як замінити барабанний блок (12 сторінок), Посібник з безпеки продукції (25 сторінок), Базовий посібник користувача (20 сторінок)

http://www.urefilltoner.co.uk/

Brother HL-L2300d refill instructions

Before use, familiarise yourself with the safety information on pages 6 and 7.

Consider doing the refill on top of sheets of old newspaper in case of accidental spills.

Compatibility of the toner

HL-L2300d, HL-L2340dw, HL-L2360dn, HL-L2365dw

DCP-L2500d, DCP-L2520dw, DCP-L2540dn, DCP-L2560dw

MFC-L2700dw, MFC-L2720dw, MFC-L2740dw

OK for Brother original cartridge codes TN-2310 (1.2K yield), TN-2320 (2.6K yield) and the starter cartridge

that arrives with the new machine.

The starter cartridge and bought cartridges are the same for the purpose of refilling.

Whichever type of cartridge you refill, it comes out as high capacity after using this product.

Ignore "Toner low" messages and associated lights

Completely ignore the "Toner low" messages of any kind.

For models that have a toner light, it will flash: ignore that too

Do reset when you get "Replace toner" pop-up or LCD panel message

facebook.com/urefilltoner

Original and largest selling do-it-yourself toner refill

If your machine has an LCD display (which is most of

them), it will say "Replace toner".

For models that have a toner light, it will now be on

steady (i.e. not flashing).

For all models: at this point the printer refuses to

print, which is a bit of a give away sign.

Now is the time to reset, with a view to carry on

printing until you get fade out.

Under no circumstances respond to this situation

by putting more toner in, just reset

We detail the reset procedures for the different models

in the following 2 pages ....

After resetting, carry on printing until you get fade out

similar to the image at the bottom of page 3. Then,

and only then, pour in the bottle of toner as described

on page 4.

youtube.com/user/urefilltonerUK

Page 1