Brother MFC-T910DW Посібник з безпеки продукції - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник з безпеки продукції для Принтер "Все в одному Brother MFC-T910DW. Brother MFC-T910DW 24 сторінки. Brief explanations for routine operations
Також для Brother MFC-T910DW: Посібник з швидкого налаштування (2 сторінок), Довідковий посібник (29 сторінок), Довідковий посібник (30 сторінок)

your electrician to replace your obsolete socket. Do not use the supplied earthed plug in any

other socket except those specified.

6. This product should be connected to an AC power source within the range indicated on the

rating label. Do not connect it to a DC power source. If you are not sure, contact a qualified

electrician.

7. Unplug this product from the mains power and telephone line sockets, and refer servicing to

qualified Service Personnel under the following conditions:

• If the power cord is damaged or frayed.

• If liquid has been spilled into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally when the operating instructions are followed. Adjust

only those controls that are covered by the operating instructions. Incorrect adjustment of

other controls may result in damage and will often require extensive work by a qualified

technician to restore the product to normal operation.

• If the product has been dropped or the casing has been damaged.

• If the product exhibits a distinct change in performance, indicating a need for service.

8. Unplug this product from the wall outlet before cleaning the outside of the product. Do not

use liquid or aerosol cleaners. Use a damp cloth for cleaning.

9. Never push objects of any kind into this product through cabinet slots, since they may touch

dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never

spill liquid of any kind on the product.

10. DO NOT place anything on top of the power cord including this product. DO NOT allow the

power cord to be stepped on.

11. Do not place this product on an unstable surface, stand, or table. The product may fall,

causing serious damage to the product.

12. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to

ensure reliable operation of the product and to protect it from overheating, these openings

must not be blocked or covered. The openings should never be blocked by placing the

product on a bed, sofa, rug, or other similar surface. This product should never be placed

near or over a radiator or heater. This product should not be placed in a built-in installation

unless proper ventilation is provided.

13. Do not place anything in front of the product that will block printouts. Do not place anything in

the path of received faxes.

14. DO NOT touch a document during printing.

15. Not all telephones will respond to incoming ringing when connected to the extension socket.

MFC models only

1. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has

accepted that the item complies with minimum conditions for connection to its network. It

indicates no endorsement of the product by Telecom, nor does it provide any sort of

warranty. Above all, it provides no assurance that any item will work correctly in all respects

with another item of Telepermitted equipment of a different make or model, nor does it imply

that any product is compatible with all of Telecom's network services.