AEG 65320 K Інструкція користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція користувача для Варильна поверхня AEG 65320 K. AEG 65320 K 40 сторінок. Ceramic glass hob
Також для AEG 65320 K: Інструкція користувача (40 сторінок)

Друкувати сторінку

Before Using for the First Time

Cleaning for the first time

Wipe the ceramic glass cooking surface with a damp cloth to remove

any traces left from manufacturing.

Important: Do not use any caustic, abrasive cleaners! The surface could

be damaged.

Operation of the Cooking Surface

TOUCH CONTROL sensor buttons

To operate the TOUCH CONTROL sensor buttons, place your finger flat

on the desired button until the corresponding indicator illuminates, or

extinguishes, or the desired function is performed.

For quicker adjustment leave your finger on the button until the

desired value is reached.

All entries are acknowledged by an acoustic signal.

Switching on the appliance

Switch on the appliance using the mains "On/Off" button.

The "Heat Setting/Residual Heat" display fields indicate j.

After the mains "On/Off" button has been operated to switch on your

appliance, one of the cooking zones must be selected using the cooking

zone selection buttons within approx. 10 seconds. Otherwise the appli-

ance switches off again for safety reasons.

Switching off the appliance

Operate the mains "On/Off" button to completely switch off the appli-

ance.

After the individual cooking zones or the entire cooking surface have/

has been switched off, the presence of residual heat is indicated by h

(as in "Hot") in the "Heat Setting/Residual Heat" display fields of the

respective cooking zones.

If all cooking zones are switched off, the appliance switches off auto-

matically after a period of time.