AEG 65320 K Інструкція користувача - Сторінка 35

Переглянути онлайн або завантажити pdf Інструкція користувача для Варильна поверхня AEG 65320 K. AEG 65320 K 40 сторінок. Ceramic glass hob
Також для AEG 65320 K: Інструкція користувача (40 сторінок)

Друкувати сторінку

Installing and Connecting Up

Installing

Important: The new appliance is only to be installed and connected up

by an approved installer.

Please observe this instruction, otherwise the warranty will not cover

any damage that may occur.

The veneer or plastic coverings on kitchen units around the appliance

must be bonded with heat resistant adhesive (100 °C). If plastic cover-

ings or the adhesive are not sufficiently temperature resistant, then the

covering may distort or come loose.

In respect of fire protection, the appliance corresponds to type Y

(EN 60335-2-6). Only this type of appliance may built into positions

with a high cupboard or wall on one side.

The cooking surface must have a heat protective base permanently

fixed in position. The distance from the base to the underside of the

cooking surface must be at least 50 mm. The edges of the cut out must

be coated with a water-proof material. The cooking surface must be

built-in such that the TOUCH CONTROL control panel is at the front

(see Fig.).

Installing and Connecting Up