AEG 66201 KF-N Посібник з монтажу та експлуатації - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Варильна поверхня AEG 66201 KF-N. AEG 66201 KF-N 36 сторінок. Aeg ceramic hob installation and operating instructions 66201 kf-n
Також для AEG 66201 KF-N: Брошура та технічні характеристики (12 сторінок), Посібник користувача (32 сторінок), Посібник з монтажу та експлуатації (32 сторінок)

Timer

There are two ways to use the timer:

– as a safety cut-out function. Set a cooking period for a cooking

zone, and after this time has elapsed the cooking zone will automati-

cally switch itself off. This function can be used for more than one

cooking zone simultaneously.

– as a countdown timer without a cut-out function ("egg timer"),

whereby an acoustic signal can be heard after the set period of time

has elapsed.

The countdown timer cannot be used if a cooking zone is switched on.

Safety cut-out

The cooking zone(s) for which you want to use the safety cut-out func-

tion must be switched on.

1. Using the timer sensor panel, select the cooking zone for which the

safety cut-out is to be set.

By touching the timer sensor panel once the first active cooking zone is

selected in a clockwise direction, and the corresponding control lamp

will flash rapidly. Hereby the (e.g.) left rear control lamp corresponds to

the left rear cooking zone. 00 will appear in the timer display.

The next active cooking zone is selected by touching the timer sensor

panel again.