AEG 66201 KF-N Посібник з монтажу та експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Варильна поверхня AEG 66201 KF-N. AEG 66201 KF-N 32 сторінки. Aeg ceramic hob installation and operating instructions 66201 kf-n
Також для AEG 66201 KF-N: Брошура та технічні характеристики (12 сторінок), Посібник з монтажу та експлуатації (36 сторінок), Посібник користувача (32 сторінок)

Operating Instructions

Please comply with these instructions. If you do not, any damage re-

sulting is not covered by the warranty.

This appliance conforms with the following EU Directives:

– 73/23/EEC dated 19.02.1973 Low Voltage Directive

– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending

Directive 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE Marking Directive

Correct use

• This appliance should be used only for normal domestic cooking and

frying of food.

• The appliance must not be used as a work surface or as a storage sur-

face.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials

or fusible objects (e.g. plastic film, plastic, aluminium) on or near the

appliance.

Child safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appli-

ance on, we recommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, regis-

tered service engineers, or competent persons.

• Built-in appliances may only be used after they have been built in to

suitable built-in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ce-

ramic (cracks, scratches or splits), the appliance must be switched off

and disconnected from the electrical supply to prevent the possibility

of an electric shock.

• Repairs to the appliance must only be carried out by trained regis-

tered service engineers.