AEG 69802 G Інструкція з експлуатації Посібник з експлуатації - Сторінка 16

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Варильна поверхня AEG 69802 G. AEG 69802 G 24 сторінки. Electrolux cooktop user manual
Також для AEG 69802 G: Брошура та технічні характеристики (12 сторінок), Інструкція з експлуатації Посібник з експлуатації (28 сторінок)

Instructions for the Installer

Building over a kitchen unit with door

Proper arrangements must be taken in

designing the furniture unit, in order to

avoid any contact with the bottom of the

hob which can be heated when it is

operated. The recommended solution is

shown in diagram 3.

The panel fitted under the hob ("a")

should be easily removable to allow easy

access if technical assistance is needed.

The space behind the kitchen unit ("b")

can be used for connections.

Fitting the hob to the worktop

Before fitting the hob into the cut out,

an adhesive seal must be fitted to the

underside outside edge of the hob. It

is essential that no gaps are left in this

seal in order to prevent spillage near

the hob seeping into the cabinet

below.

1) Remove the pan supports, the

burners caps and crowns and turn

the hob upside down, taking care

the ignition candles are not

damaged in this operation.

2) Place the sealing gasket all

around the glass top edge as

shown in the diagram.

3) Fit the hob in the cut out and push

it down until the glass top and the

working top make contact, as

shown in the diagram.

Dimensions are given in mm.

FO 1013

FO 2107

A) Sealing gasket

FO 2108