Brother DCP-J572DW Довідковий посібник - Сторінка 22

Переглянути онлайн або завантажити pdf Довідковий посібник для Принтер Brother DCP-J572DW. Brother DCP-J572DW 32 сторінки. Brief explanations for routine operations
Також для Brother DCP-J572DW: Довідковий посібник (34 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник (19 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник з безпеки продукції (21 сторінок)

Brother DCP-J572DW Довідковий посібник

Error and Maintenance Messages

The most common error and maintenance messages are shown in the table. For more detailed
information, see the Online User's Guide.
You can correct most errors and perform routine maintenance yourself. If you need more tips, go
to your model's FAQs & Troubleshooting page on the Brother Solutions Center at
support.brother.com.
Error Message
Absorber NearFull The ink absorber box must be replaced soon. Contact Brother
B&W Print Only
Replace Ink
BT Call Sign On
Cannot Detect
Action
customer service or your local Brother dealer.
• The ink absorber box absorbs the small amount of ink emitted
during print head cleaning.
One or more of the colour ink cartridges have reached the end of their
lives.
Replace the ink cartridges.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
The machine will stop all print operations and you will not be able to
use the machine until you change to a new ink cartridge in the
following cases:
• If you unplug the machine or take out the ink cartridge.
• If you select the Slow Drying Paper option on the machine or in
the printer driver.
BT Call Sign is set to On. You cannot change the Receive Mode from
Manual to another mode.
Set BT Call Sign to Off.
For more detailed information, see the Online User's Guide: Enable
the Machine to Work with BT Call Sign (with Your External Telephone
only).
Remove the used ink cartridge and install a new one.
Replace the cartridge with a Brother Original ink cartridge. If the error
message remains, contact Brother customer service or your local
Brother dealer.
Take out the new ink cartridge and reinstall it slowly and firmly until it
locks into place.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
Slowly turn the ink cartridge so that the ink supply port is pointing
downwards, and then reinstall the cartridge.
Check the model numbers of the ink cartridges and install the correct
ink cartridges.
See Related Information: Supply Specifications at the end of this
section.
21