Brother DCP-L2660DW Посібник з безпеки продукції - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з безпеки продукції для Принтер Brother DCP-L2660DW. Brother DCP-L2660DW 22 сторінки.
Також для Brother DCP-L2660DW: Посібник з швидкого налаштування (2 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник з безпеки продукції (22 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник з швидкого налаштування (2 сторінок)

DO NOT run your hand over the edge of the paper. The thin and sharp edges of the paper

may cause an injury.

This machine contains electronic components that emit electromagnetic radiation during the

printing operation. To avoid the possibility of electromagnetic radiation exposure to your body,

maintain a distance of 7.87 inches (20 cm) from both sides of the machine when printing.

DO NOT remove or damage any of the caution or warning labels inside the product.

IMPORTANT

• A distinct change in the product's performance may indicate a need for service.

• DO NOT connect your product to an AC power outlet controlled by wall switches or

automatic timers, or to the same circuit as a large appliance or other equipment that

requires a significant amount of electricity. It could disrupt the power supply. Disruption of

the power supply may also delete information from the product's memory, and repeated

cycling of the power supply can damage the product.

• DO NOT put any objects on top of the product. Doing so may cause the product to

malfunction.

Important Safety Instructions

DO NOT attempt to service this product yourself because opening or removing covers may

expose you to dangerous voltage points and other risks and may void your warranty. Refer all

servicing to a Brother Authorized Service Center.

1. Read all of these instructions.

2. Save these instructions for later reference.

3. Follow all warnings and instructions marked on the product.

4. Unplug this product from the AC power outlet and refer servicing to Brother Authorized

Personnel if any of the following occur:

• If liquid has been spilled into the product.

• If the product has been exposed to rain or water.