Brother DCP-T420W Посібник користувача - Сторінка 6

CAUTION

Put your product on a flat, level, stable surface (such as a desk), that is

free from vibration and shocks. Put the product near a telephone socket

(MFC models only) and a standard grounded electrical socket.

DO NOT place this product on an unstable cart, stand, or table,

particularly if children are expected to be near the product. The product

is heavy and may fall, causing injury to you or others and serious

damage to the product. For the products with scanning functionality,

there is an added risk of injury if the scanner glass should break.

Avoid placing your product in a busy area. If you must place it in a busy

area, ensure that the product is in a safe location where it cannot be

accidentally knocked over, which could cause injury to you or others

and serious damage to the product.

Ensure that cables and cords leading to the product are secured so as

not to pose a tripping hazard.

DO NOT place heavy objects on the product.

DO NOT place any objects around the product. Such objects block the

access to the electrical socket in case of emergency. It is important that

the product can be unplugged whenever needed.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or

generate magnetic fields. Doing so may interfere with the operation of

the product, causing print quality problems.

• DO NOT tip or turn the product upside down after ink tanks are filled.

Doing so may cause ink spillage and internal damage to the product.

• DO NOT place your product next to sources of interference, such as

speakers or the base units of non-Brother cordless telephones. Doing

so may interfere with the operation of the product's electronic

components.