Brother GTX pro Довідковий посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Довідковий посібник для Принтер Brother GTX pro. Brother GTX pro 13 сторінок. Garment printer
Також для Brother GTX pro: Короткий посібник користувача (15 сторінок), Посібник користувача (16 сторінок), Посібник з налаштування (40 сторінок)
Wiper Cleaning
Nozzle Guards Cleaning
Wipe clean the 2 nozzle guards
Solution. Same way to clean the metallic parts
A very important place to clean is area
Be sure NOT to touch the nozzle surface
> Manually move the carriage to such
a position that you can perform the
cleaning with ease.
CLEAN
8
Both white plastic wipers [White & CMYK] should be
cleaned on both sides and tops with the Cleaning Stick T
dipped in Cleaning Solution.
1
&
2
with the Clean Stick R dipped in Cleaning
X0060
6
between nozzle guard and nozzle plate.
at all!
3
Clean Stick
R
1
TO BE DONE EVERY WEEK
!
Use the tip of the Cleaning Stick T
to clean under the teeth of the wiper
holder and remove the dried ink.
Be sure to use the Cleaning Stick T
separately for white ink and color ink!
TO BE DONE EVERY WEEK
!
&
5
of the printhead.
4
5
DO NOT
TOUCH
6
4
> Do not empty remaining Cleaning
Solution from the Cleaning Cup in the
Maintenance station but in the Waste
Tank below the printer!
3
2