Brother GTX pro Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Принтер Brother GTX pro. Brother GTX pro 16 сторінок. Garment printer
Також для Brother GTX pro: Довідковий посібник (13 сторінок), Короткий посібник користувача (15 сторінок), Посібник з налаштування (40 сторінок)

Daily Agitation of White

 Remove the white ink

cartridges and shake it" is displayed before starting printing operation.

 Remove both white ink cartridges and gently shake from side to side 100 times

to stir the white ink

 Alternatively, you can use a human body shaper

Pouch Replacement - Very Important Process!

 Open the cartridge's lid on a fat surface and remove the empty pouch. Unpack

carefully a new ink pouch from its shipping carton

 Push the green tip end of the ink pouch into the cartridge until it clicks into

place. Straighten the ink pouch to align it with the gutter of the lid of cartridge,

and mount in position inside the metal spring by pulling it with your hand. If

the edge of the ink pouch is bent or undulating significantly, make it straight

and fat with your hand to avoid wrinkles.

 Place the pouch in a straight alignment with the cartridge. Align lines with each

other!

 Close the lid, verify if the spring is rolling to the front. Place the cartridge at

around 45° and push on the 2 upper metallic latches to add a bit more tension

on the ink pouch. Double-check that you have not generated some wrinkles

again

 Clean the outside of the green tip end that goes in contact with needle inside

printer. Attach a shelf life sticker included with ink pouch onto the front of the

cartridge.

 Errors 2084 & 2085 (Winding-Up Failure) may occur if the white ink cartridges

are not loaded correctly.

WHITE INK

RATIO