Brother GTX-4 Посібник з налаштування - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник з налаштування для Принтер Brother GTX-4. Brother GTX-4 37 сторінок. Garment printer
Також для Brother GTX-4: Інструкція з експлуатації (18 сторінок)

Друкувати сторінку

Setup of the printer

(e)

Tuck the extra cable into the space as shown in area (e) for the

color side.

To eliminate the slack of the flat cable on the resin cover side,

hold the cable down by using a clip as shown in a.

Hook the two claws of the resin cover to mount the cover.

①

M 4

Bk1

M 4

Bk1

Remove four caps of the head.

Check that the head and the marker of each tube are matched

X0123

and connect the tubes one by one from back to front of the

machine by rotating the nut until it stops.

Do not rotate the nut as illustrated in (f). It could

disconnect the tube and leak the contained ink.

IMPORTANT

Be sure to remove the caps attached to the

head before connecting.

(f)

X0012