Brother HL HL-2230 Посібник з швидкого налаштування

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Принтер Brother HL HL-2230. Brother HL HL-2230 2 сторінки. Quick setup guide - english
Також для Brother HL HL-2230: Посібник з швидкого налаштування (2 сторінок)

Друкувати сторінку

Brother HL HL-2230 Посібник з швидкого налаштування

(EU Only)

Start Here

WARNING indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION indicates a potentially

hazardous situation which, if not avoided,

may result in minor or moderate injuries.

Remove the packing material from the machine

IMPORTANT

DO NOT connect the AC power cord yet.

Remove the packing tape from the outside of the machine and the silica gel

pack from the face‑down output tray.

CAUTION

DO NOT eat the Silica Pack. Discard immediately.

Open the front cover.

Load paper in the paper tray

Pull the paper tray completely out of the machine.

While pressing the green paper‑guide release lever,

slide the paper guides to fit the paper size you are

loading in the tray. Make sure that the guides are

firmly in the slots.

Note

For Legal or Folio size paper, press the release button in the bottom

of the paper tray and then pull out the back of the paper tray. (Legal

or Folio size paper are not available in some regions.)

Print a test page

IMPORTANT

DO NOT connect the Interface cable yet.

Connect the AC power cord to the machine and then connect it to an AC

power outlet.

Consumables

When the time comes to replace consumable items, an error will be indicated by the

LED's on the control panel. For more information about the consumables for your

machine, visit us at http://www.brother.com/original/ or contact your local Brother reseller.

Toner cartridge

Drum unit

For replacing the consumable items, see Replacing consumable items in the User's Guide.

Before using this machine for the first time, read this Quick Setup

Guide to setup and install your machine.

To view the Quick Setup Guide in other languages, please visit

http://solutions.brother.com/.

ENG

Version 0

Note

Not all models are available in all countries.

Unpack the machine and check the components

Note

•

We recommend that you save the original packaging.

•

The components included in the box may differ depending on your country.

•

If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit.

The machine should be adequately insured with the carrier. How to repack the machine, see Packing and shipping the machine in the

User's Guide.

•

The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you want to use (USB or Network).

USB cable

It is recommended to use a USB 2.0 cable (Type A/B) that is no more than 2 meters (6 feet) long.

Network cable

Use a straight‑through Category5 (or greater) twisted‑pair cable for 10BASE‑T or 100BASE‑TX Fast Ethernet Network.

Lift the elastic band off the drum.

Pull the paper strip to remove the protective

material as shown in the illustration.

Take out the drum unit and toner cartridge

assembly.

Fan the stack of paper well to avoid paper jams and misfeeds.

Put paper in the tray and make sure:

The paper is below the maximum paper mark (

b b b).

Over filling the paper tray will cause paper jams.

The side to be printed on must be face down.

The paper guides touch the sides of the paper so it will feed

properly.

Turn on the machine power switch.

After the machine has finished warming up, the

Ready LED

stops blinking and stays green.

For Network Users (For HL-2250DN only)

Web Based Management (web browser)

The Brother print server is equipped with a web server that allows you to monitor its status

or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).

Note

•

The login name for the Administrator is '

admin' (case sensitive) and the default password is

'access'.

•

We recommend Microsoft

Internet Explorer

6.0 (or greater) or Firefox 3.0 (or greater) for

Windows

and Safari 3.0 (or greater) for Macintosh. Please also make sure that JavaScript and

Cookies are always enabled in whichever browser you use. To use a web browser, you will need

to know the IP Address of the print server. The IP Address of the print server is listed on the Print

Setting Page.

Documentation/

Installation CD-ROM(s)

AC Power Cord

Drum Unit and Toner Cartridge Assembly

Gently shake it from side to side several times to

distribute the toner evenly inside the assembly.

Put the drum unit and toner cartridge assembly

back in the machine.

Close the front cover of the machine.

Put the paper tray firmly back in the machine. Make sure that

it is completely inserted into the machine.

For more information about recommended paper, see

Recommended paper and print media in the User's Guide.

Press

Go. The machine will print a test page. Check that the

test page has printed correctly.

Note

This function will not be available after the first

print job you send from your computer.

Now go to

Turn the sheet over to install the printer driver.

Type

http://machine_ip_

address/ into your browser. (Where

machine_ip_address is the IP

Address or the print server name)

For example: http://192.168.1.2/

See Web Based Management in the

Network User's Guide.

Quick Setup Guide

HL-2130, HL-2132, HL-2220, HL-2230,

HL-2240, HL-2240D, HL-2242D, HL-2250DN

WARNING

Plastic bags are used in the packaging of your machine. Plastic bags are not toys.

To avoid danger of suffocation, please keep these bags away from babies and

Quick Setup Guide

Safety and Legal

children and dispose of them properly.

Booklet

Note

Keep a minimum gap around the machine as shown in the illustration.

100mm

(4 in.)

(pre‑installed)

Printer LED Indications

Blinking:

ON:

Printer LED

OFF

SLEEP

DEEP SLEEP

Toner

Drum

Error

Ready

Dimmed

Printer LED

TONER LOW

REPLACE

TONER

Toner

Drum

Error

Ready

Chapter 4

User's Guide

Printer LED

COVER OPEN

NO PAPER

PAPER JAM

Toner

Drum

Error

Ready

Chapter 5

User's Guide

The LED will blink ON and OFF at 1 second intervals.

The LED will blink ON and OFF at 0.5 second intervals.

The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.

You can change the toner setting to the continue mode. Press Go seven times (all the LED flashes twice, and then

the Ready LED is on).

The machine continues printing until the LED indicates the toner ended message.

Reset the network settings to the

factory default

You can reset the print server back to its default factory

settings (resetting all information such as the password

and IP address information).

Turn off the machine.

Make sure that the front cover is closed and the

power cord is plugged in.

100mm(4 in.)

100mm

(4 in.)

120mm

(4.72 in.)

OFF:

WARMING UP

READY

RECEIVING DATA

COOLING DOWN

DATA REMAINING

TONER ENDED

DRUM END

REPLACE

SOON

DRUM

Chapter 4

DRUM ERROR

DRUM STOP

Service call

error

Chapter 4

Chapter 3

Hold down

Go as you turn on the power switch. Keep

Go pressed down until all the LEDs light up and then

Ready LED turns off.

Release

Go. Make sure that all the LEDs turn off.

Press

Go six times. Make sure that all the LEDs light

up to indicate the print server has been reset to its

factory default settings. The machine will restart.