AEG FM 7803 K-AN Посібник користувача - Сторінка 23
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня AEG FM 7803 K-AN. AEG FM 7803 K-AN 40 сторінок. Ceramic glass induction hob
Друкувати сторінку
What to do if ...
The cooking zones will not
switch on or are not function-
ing
The residual heat indicator is
not displaying anything
Power function cannot be
switched on
Display changes between two
heat settings
f
lights up
_
is lit
Problem
Possible cause
More than 10 seconds have
passed since the appliance was
switched on
The child safety device is
switched on l
Several sensor fields were
touched at the same time
Automatic switch off has been
triggered
STOP+GO is activated
The cooking zone was only on
for a short time and is there-
fore not hot
The Power function function
has already been activated
several times quickly one after
the other
Power Management is reduc-
ing the power of this cooking
zone
Unsuitable cookware
No cookware on the cooking
zone
The diameter of the bottom of
the cookware is too small for
the cooking zone
Overheating protection for the
cooking zone has been trig-
gered
Automatic switch off has been
triggered
What to do if ...
Switch the appliance on again.
Deactivate the child safety de-
vice (See the section "Child
safety device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
u
Switching off STOP+GO
If the cooking zone is sup-
posed to be hot, call the Cus-
tomer Service Department.
Let cooking surface cool down.
See section "Power Manage-
ment" in the Operating the
Appliance chapter
Use suitable cookware
Place cookware on the cooking
zone
Move onto a smaller cooking
zone
Use suitable cookware
Switch off the cooking zone.
Switch the cooking zone on
again
Switch off the cooking zone.
Switch the cooking zone on
again
23
Remedy