5
Introduction
General Precautions
The Machine
•
The machine is a precision machine. Do not drop or hit the machine.
•
Do not lift the machine by the RD Roll compartment cover. The cover could come off and
the machine could fall and become damaged.
•
The machine may malfunction if left near a television, radio, etc. Do not use the machine
near any machine that can cause electromagnetic interference.
•
Do not insert any objects into or block the label output slot, USB port, Serial port or LAN
port.
•
Use only the interface cable (USB cable) included with the machine.
•
Do not attempt to print labels while the RD Roll compartment cover is open.
Power Cord
•
This product must be installed near an electrical socket that is easily accessible. In case
of emergencies, you must disconnect the power cord from the electrical socket to shut
off power completely.
RD Roll
•
Use only genuine Brother accessories and supplies (with
•
If the label is attached to a wet, dirty, or oily surface, it may peel off easily. Before
applying the label, clean the surface to which the label will be applied.
•
RD Roll uses thermal paper so that ultraviolet rays, wind, and rain may cause the colour
of the label to fade and the ends of the label to peel off.
•
Do not expose the RD Rolls to direct sunlight, high temperatures, high humidity, or dust.
Store in a cool, dark place. Use the RD Rolls soon after opening the package.
•
Scratching the printed surface of the label with your finger nails or metal objects, or
touching the printed surface with hands dampened by water, sweat, or medicated cream,
etc., can cause the colour to change or fade.
•
Do not apply labels to any persons, animals, or plants. In addition, never apply labels to
public or private property without permission.
•
The last label in an RD Roll may not be printed correctly. For this reason, the roll contains
more labels than that indicated on the package.
•
When a label is removed after being applied to a surface, a portion of the label may
remain.
•
Some RD Rolls use permanent adhesive for their labels. These labels cannot be easily
peeled off once attached.
CD-ROM and Software
•
Be careful not to scratch the CD-ROM. Do not place the CD-ROM in any location
exposed to high or low temperatures.
•
Do not place heavy objects on the CD-ROM or bend it.
•
The software on the CD-ROM is intended for use with this machine only. See the Licence
on the CD for details. This software may be installed on multiple computers for use in an
office, etc.
mark).
Друкувати сторінку