AEG 914 580 005 Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина AEG 914 580 005. AEG 914 580 005 49 сторінок.

max. 105°

Hinges

To mount the hinges it is necessary to drill

two holes (dia. 35 mm, depth 12.5 - 14 mm

depending on the depth of cupboard door)

on the inner side of the door.

The hinges will be fixed to the door by

means of the four supplied screws A.

Fix the hinges to the hinge supports on the

appliance by means of the two supplied

screws B.

The appliance is pre set for a magnetic

closure.

1. Position the screw C and the counter-

2. Open the cupboard door and screw the

To align the door perfectly,

make sure that the edge of

cupboard door is parallel with

the appliance edge and to

respect the proper opening

angle (max. 105 °).

The hinges can be adjusted to

compensate for possible

uneven thickness of the door.

magnet D on the magnetic plate N. Lean

the cupboard door against the screw

until it leaves a mark.

counter-magnet D (steel disk + rubber

ring E) with the screw C in the inner side

of the cupboard door, where the screw

left the mark as described in the first

step.

ENGLISH