Fujitsu Lifebook A3130 Посібник з біосу - Сторінка 26

Переглянути онлайн або завантажити pdf Посібник з біосу для Ноутбук Fujitsu Lifebook A3130. Fujitsu Lifebook A3130 31 сторінка. Lifebook a series
Також для Fujitsu Lifebook A3130: Посібник для початківців (2 сторінок)

Fujitsu Lifebook A3130 Посібник з біосу
L i f e B o o k A S e r i e s B I O S

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.
A bootable CD-ROM has either a floppy disk format or a hard drive format. When a bootable CD-ROM is
used, drive allocations change automatically without changing the BIOS setup. If a floppy disk format is
used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if internal
hard drive is not present or is disabled. A bootable CD-ROM can never use a C: designation if a formatted
internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot
sequence ignores the new drive designations, but your application software will use the new designations.
Main
Advanced
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Boot Device Priority:
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Hard Disk Drives
Priority
26
BIOS Setup Utility
Security
Boot
[! Removable Drvs]
[Hard Disk Drives]
[CD/DVD Drives]
[Network Boot]
vv
v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.
Figure 16. Boot Device Priority Submenu
Options
! Removable Drvs
Hard Disk Drives
CD/DVD Drives
Network Boot
Disabled
(Installed HDD)
Disabled
Info
Exit
Specifies the boot
sequence from the
available devices.
A device with an
exclamation mark (!)
has been disabled in
the corresponding type
menu.
F1: Help
Description
Boot selections determine the order the BIOS searches for the
operating system during a startup sequence. To change the
order, use the [up] or [down] cursor keys to select the device.
Press the [Space Bar] to assign the drive to the selected boot
device.
NOTE: If you use the CD/DVD drive as the first boot device,
certain files may be overwritten depending upon your operating
environment.
[Installed HDD]
Esc: Exit