Brother P-TOUCH 80 Посібник користувача

Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Brother P-TOUCH 80. Brother P-TOUCH 80 2 сторінки.

Друкувати сторінку

1. Creating Labels

USER'S GUIDE

English

www.P-touch.com

LN9049001

Printed in China

INTRODUCTION

With your P-touch 80, you can create labels for any application. Select from

the many frames, character sizes and styles to design beautiful custom la-

bels. In addition, the variety of tape cartridges available allows you to print la-

bels with different widths and exciting colours.

Read this manual carefully before starting and keep the manual in a handy

place for future reference.

GENERAL PRECAUTIONS

• Use only Brother M tapes with this machine. Do not use tapes that do not have

the

mark.

• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry

cloth.

• Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton swab) when

cleaning the print head.

• To avoid injuries, do not touch the cutter's edge.

• To prevent damage or breakage of the LCD glass, do not press on the display.

• Do not put any foreign objects into or heavy objects on the machine.

• Do not leave any rubber or vinyl on the machine for an extended period of time,

otherwise the machine may be stained.

• Do not get the machine wet, such as by handling it with wet hands or spilling

beverages on it.

• Do not expose the machine to extremely high temperatures or high humidity. Never

leave it on the dashboard, in the back of your car, near heaters or other hot

appliances. Keep it out of both direct sunlight and rain.

• Avoid using the machine in extremely dusty places.

• Depending on the environmental conditions and the applied settings, some

characters or symbols may be difficult to read.

• Do not pull on the tape being fed from the P-touch, otherwise the tape cassette

or P-touch may be damaged.

• Do not attempt to cut the tape while printing or feeding since this will damage the tape.

• Do not try to print labels using an empty tape cassette set in the P-touch. Doing so will

damage the print head.

• Remove the batteries if you do not intend to use the machine for an extended period

of time. (Note: When no power is supplied for more than two minutes, all text and

format settings will be cleared. Language and clock settings will also be cleared.)

• Be sure to turn off the machine before replacing the batteries or the tape cassette.

• Do not use old and new batteries together or mix alkaline batteries with other type

batteries, or set the positive and negative end in the wrong position. Otherwise the

batteries may have leakage or fracture.

PREPARATION

Power Supply & Tape Cassettes

Remove the back cover by pressing in

the rough area at the top end of the

machine.

If a tape cassette is already installed,

remove it by pulling it straight up. Also, if

batteries are already installed, remove

them.

• Be sure to turn off the machine before

replacing the batteries or the tape

cassette.

Print head

Insert four new AAA-size alkaline

batteries (LR03), making sure that

their poles point in the correct

directions. Always replace all four

batteries at the same time using brand

new ones.

Insert a tape cassette, making sure

that it snaps into place.

Tape guide

Cutter's edge

End of tape

Tape exit slot

• Make sure that the end of the tape feeds under the tape guides.

• Use only Brother M tapes with this machine.

Attach the back cover by inserting the

two hooks at the bottom into the slots

on the machine, then pushing down

firmly on the cover until it snaps into

place.

• After you have installed the tape, feed

the tape (

) once and

then push in the tape cutter lever to cut

the tape.

Tape cutter lever

OPERATION

Keyboard & LCD

Width

Size

Style

Cursor

Underline/Frame

Caps

Num Lock

Label Length

Print key

Time/Date key

Time/Date

Preview key

Function key

Cursor key

Fn Fn

Power key

Backspace key

Character keys

- ,

Shift key

Caps

Num

Symbol

Space

Accent

Shift key

Caps key

Enter key

Num Lock key

Accent key

Symbol key

Space key

• The LCD shows one row of 12 characters; however, the text that

you enter can be up to 80 characters in length, which will scroll

across the display.

• Use Cursor key while holding down Shift key to go to beginning /

end of the text.

Initial Setting

Start your machine

Provide power by installing four AAA batteries, and then press

Set your language (Language options depend on the country of purchase.)

Choose a language with

and press

Set Date (DD/MM/YY) and Time (hh:mm)

Example: setting the clock to 20th March 2006, 15:30

Date (DD/MM/YY)

input "20"

input "03"

input "06"

Time (hh:mm)

input "15"

input "30"

You can also confirm the current setting and continue to the next

setting by pressing the right cursor key.

• The machine automatically turns off if no key is pressed within 5

minutes.

• To cancel operations, press

• To return the P-touch to its factory settings, turn it off, and then

while holding down

and

, press

to turn the machine

back on. Finally, release

and

[GETTING STARTED]

REFERENCE

Troubleshooting

Error message

Message

Cause/Remedy

Battery

The batteries are weak. Replace them with new ones.

Invalid

An invalid number was specified as the Label Length setting.

No Text

• The Print key or Preview key is pressed when no text has

been entered.

• A Copies (copy printing) setting was being specified, when

no text is entered.

Line Lmt

Line Limit. You can have up to 2 printable lines.

was pressed to enter a third line.

Full

The maximum number of characters (80 characters) have

already been entered.

Text Lmt

Text Limit. The text length exceeds the selected label length

or the selected Auto Format setting length.

What to do when...

Problem

Solution

The display stays blank

• Check that the batteries are correctly inserted.

after you have turned on

• If the batteries are weak, replace them.

the machine.

Language setting of the

• Turn off the machine and then while holding

machine is incorrect.

down

and

, press

to turn the machine

back on. Finally, release

and

• Note: The text and formats in the display are erased. Also,

the language, unit and clock settings will be cleared.

The machine does not

• Check that the tape cassette has been inserted correctly.

print, or the printed

• If the tape cassette is empty, replace it.

characters are not

• Make sure that the back cover is properly closed.

formed properly.

The setting has been

• The batteries may be weak. Replace them.

lost.

• When no power is supplied for more than two minutes, all

text and formats in the display will be lost. Language, unit

and clock settings will also be cleared.

A blank horizontal line

• There may be some dust on the print head. Remove the

appears through the

tape cassette and use a dry cotton swab to gently wipe the

printed label.

print head with an up-and-down motion.

The machine has

• Turn off the machine, and then while holding

"locked up" (i.e., nothing

down

and

, press

to turn the machine

happens when a key is

pressed, even though

back on. Finally, release

and

the machine is on).

• Note: The text and formats in the display are erased. Also,

the language, unit and clock settings will be cleared.

The machine turns off

• The batteries may be weak. Replace them.

when you try to print.

The tape does not feed

• Make sure that the end of the tape feeds under the tape

properly or the tape gets

guides.

stuck inside the

• The cutter lever was used while printing. Do not touch the

machine.

cutter lever during printing.

All text and format

• Press

while holding down

, or press

, then

settings need to be

cleared to create a new

label.

Specifications

Item

Specification

172 mm (W) × 100 mm (D) × 58 mm (H)

Dimensions

Weight

240 g (without batteries and tape cassette)

Power supply

Four AAA-size alkaline batteries (LR03)

Tape cassette

Brother M tape (width) :

9 mm, 12 mm