Brother P-TOUCH 98OOPCN Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Brother P-TOUCH 98OOPCN. Brother P-TOUCH 98OOPCN 48 сторінок.
Друкувати сторінку
Connecting the printer
Connect the printer to the power source and a computer.
Connecting to the power source
Connect the included power supply
1
cord to the AC adapter.
Insert the AC adapter connector into
2
the AC adapter socket on the back of
the printer.
DC IN
24V
12
DC IN 24V
Plug the power supply cord into an
3
electrical outlet (AC 220 to 240 V).
Turning on the printer
4
Turn on the main power switch on the
back of the printer, and then press the
power button on the front of the printer.
Turning off the printer
Hold down the power button on the front
of the printer until the printer is turned off,
and then turn off the main power switch
on the back of the printer.
S T A T U S
Power
button
Note
Always turn the power off first using the
●
power button on the front of the printer
before removing the AC adapter or
turning off the main power switch.
After using the printer, disconnect the
●
power supply cord from the electrical
outlet and the AC adapter from the
printer and store them for future use.
When removing the AC adapter always
●
pull the plug. Do not pull the AC adapter
or power supply cord. The wire in the
cords may break.
Do not use any AC adapter other than
●
the one included with the printer. Failure
to observe this may result in an accident.
24V
DC IN
Main power
STA TUS
switch