Brother P-touch Pro PT-H111 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Brother P-touch Pro PT-H111. Brother P-touch Pro PT-H111 16 сторінок.
Друкувати сторінку
Printing Labels
Preview
• Pressing the Preview key displays a preview of
the label, and may differ from the actual label
when printed.
• If the LCD cannot display all the text at once,
press
/
• Press
/
mode.
Feeding (Tape Feed)
+
• This function feeds approximately 1" (25 mm)
of blank tape.
• Do not pull uncut tape from the Tape Cassette,
as this may damage the Tape Cassette.
Printing
Press the Print key to print the text displayed on
the LCD.
Printing Multiple Copies
+
[Copies:]
-
• You can print up to nine copies of each label.
• DO NOT touch the Tape Cutter Lever while the
message [Please Wait] appears on the LCD.
• To cut tape: When printing ends, push the
Tape Cutter Lever after the message [Please
Cut] appears.
• To remove tape backing, fold the tape
lengthwise (with the text facing inward), to
expose the inside edges that run down the
center of the tape backing. Peel and apply the
label.
to display the hidden text.
/
to exit Preview
/
Setting Margins
/
Print]
[Full] / [Half] / [Narrow]
Use one of these options to customize margin
length before and after your text.
The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
Full
Half
Narrow
[Chain Print] (tape-saving option)
Use this option to print multiple different labels
with narrow margins. This option saves tape.
Enter your text.
1.
Press
2.
When [Feed OK?] appears on the LCD,
/
3.
press
Clear the text, enter the text you want on the
4.
next label, and then press
After your last label prints, when [Feed OK?]
5.
appears on the LCD, press
NOTE
• When you use [Chain Print], feed the tape before
pressing the Tape Cutter Lever (
otherwise part of the text may be cut off.
• Do not pull the tape, as this may damage the
Tape Cassette.
• The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
[Margin]
/
[Full / Half / Narrow / Chain
LCD
Printout
.
to change the text.
ABC
2.7"
1"
1"
ABC
1.6"
0.47"
0.47"
ABC
1.0"
0.16"
0.16"
.
.
+
),