AEG L 75460 TL1 Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина AEG L 75460 TL1. AEG L 75460 TL1 24 сторінки. Aeg washing machine
16 www.aeg.com
Before you press button
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
9.8 Cancel the delay start
1.
Press button
tor flashes.
2.
Press button
til the display shows 0'.
3.
Press button
starts.
9.9 Open the lid
While a programme or the delay start
operates, the lid is locked.
To open the lid:
1.
Press button
lid 2 minutes after the appliance
stops. The door lock symbol in the
display goes off.
2.
Open the lid.
3.
Close the lid and press button
The programme or the delay start
continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the lid .
If necessary, do the following
procedure to open the lid.
1.
2.
3.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
9.10 At the end of programme
• The appliance stops automatically.
4
. The related indica-
5
again and again un-
4
. The programme
4
. You can open the
Deactivate the appliance.
Wait for some minutes.
Make sure that there is no
water in the drum.
• The acoustic signals operate.
4
to
• In the display
• The indicator of the Start/Pause but-
ton
4
• You can open the lid 2 minutes after
the appliance stops. The door lock
symbol goes off.
• Press button
pliance. After five minutes from the
end of the programme, the AUTO
OFF function automatically deacti-
vates the appliance.
When you activate the appliance
again, the display shows the end
of the last set programme. Turn
the programme knob to set a
new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is emp-
ty.
• Keep the door ajar, to prevent mildew
and odours.
• Close the water tap.
The washing programme is comple-
ted, but the 'Rinse Hold' function is
on:
.
4
– The drum turns regularly to prevent
the creases in the laundry.
– The door stays locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed.
2.
Press the Start/Pause button
The appliance drains the water and
spins.
3.
When the programme is completed
and the door lock symbol goes off,
you can open the door
4.
Deactivate the appliance.
The appliance drains and spins
automatically after approximately
18 hours.
comes on.
goes off.
1
to deactivate the ap-
4
.