AEG L 75470 FL Посібник користувача - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина AEG L 75470 FL. AEG L 75470 FL 36 сторінок.
Також для AEG L 75470 FL: Посібник користувача (36 сторінок), Посібник користувача (32 сторінок), Посібник користувача (36 сторінок), Посібник користувача (36 сторінок)

Друкувати сторінку

CHANGE A FUNCTION

You can change only some functions

before they operate.

1. Press button

flashes.

2. Change the function set.

SET THE DELAY START

1. Press button

until the display shows the number

of minutes or hours. The related

symbols comes on.

2. Press button

starts the countdown of the delay

start.

When the countdown is comple-

ted, the programme starts auto-

matically.

Before you press button

start the appliance, you can can-

cel or change the set of the de-

lay start.

You cannot set the delay start

with the Steam programme.

CANCEL THE DELAY START

1. Press button

cator flashes.

AT THE END OF THE PROGRAMME

• The appliance stops automatically.

• The acoustic signals operate.

• In the display

• The indicator of the Start/Pause but-

ton

• The door lock symbol goes off.

• Press button

pliance. After five minutes from the

end of the programme, the energy

saving function automatically deacti-

vates the appliance.

When you activate the appli-

ance again, the display show the

end of the last set programme.

Turn the programme knob to

set a new cycle.

. The indicator

again and again

, the appliance

. The related indi-

comes on.

goes off.

to deactivate the ap-

2. Press button

until the display shows 0'.

3. Press button

starts.

OPEN THE DOOR

While a programme or the delay start

operates, the appliance door is locked.

To open the appliance door:

1. Press button

symbol in the display goes off.

2. Open the appliance door.

3. Close the appliance door and press

button

delay start continues.

If the temperature and level of

the water in the drum are too

high, the door lock symbol stays

on and you cannot open the

door. To open the door do the

steps that follow:

1. Deactivate the appliance.

2. Wait for some minutes.

3. Make sure that no water is

If you deactivate the appliance,

it is necessary to set the pro-

gramme again.

• Remove the laundry from the appli-

ance. Make sure that the drum is

empty.

• Keep the door ajar, to prevent mil-

dew and odours.

• Close the water tap.

The washing programme is

completed, but there is water in the

drum:

– The drum turns regularly to prevent

the creases in the laundry.

– The door stays locked.

– You must drain the water to open the

door.

again and again

. The programme

. The door lock

. The programme or the

in the drum.