Fujitsu Lifebook S761 Початок роботи - Сторінка 3

Переглянути онлайн або завантажити pdf Початок роботи для Ноутбук Fujitsu Lifebook S761. Fujitsu Lifebook S761 13 сторінок. Fujitsu lifebook s761: quick start
Також для Fujitsu Lifebook S761: Посібник із швидкого старту (2 сторінок), Технічний паспорт (2 сторінок)

Друкувати сторінку

Initial Start Up

opening the

Display Panel

DC Power

Jack

Connecting the LAN Device

Power/Suspend/Resume Button

Wireless LAN on/off Switch Location

1. open the Display Panel

• Ensure that your LIFEBOOK is on a hard level surface and that

• Lift the display, being careful not to touch the screen.

• Adjust the display until it is at a comfortable viewing angle.

2. Connect AC Power

• Plug the power cord into the AC adapter.

• Plug the AC adapter into your notebook.

• Connect the power cord to an electrical outlet.

3. Connect to Internet or Network

• Connect an Ethernet cable to the LAN jack on your notebook and

4. Booting the System

Important:

• During the setup procedure, do not disconnect the power supply,

• You should not attach any external devices and do not put a DVD/CD in

AC Adapter

• Press the Suspend/Resume/Power button (above the keyboard) to

5. Register

• Accept the Microsoft

• Select your User ID and Password during the "Welcome Screen."

• Keep a record of your User ID and password stored in a

• THE SCREEN WILL GO DARK FOR APPROXIMATELY

• DO NOT ATTEMPT TO TURN POWER ON OR OFF DURING

6. Registering Your LIFEBooK notebook

• Register your notebook with Fujitsu Service and Support via our

• You will need to be set up with an Internet Service Provider (ISP)

7. Installing Click me!

• To verify a successful installation, the application icons will appear

• Check to be sure the WLAN switch is on or that your LIFEBOOK

• After the first boot, a dialog box will automatically open that

• When you click the Click Me! icon, your system will automatically

the air vents are not blocked.

to a wall jack or to an Ethernet router, or turn on wireless LAN.

press any buttons, or use any peripheral devices such as a

mouse, keyboard, or remote control.

your drive until you have gone through the initial power on sequence.

The Lithium ion battery is not charged upon purchase.

Initially you will need to connect either the AC adapter

or the Auto/Airline adapter to use your notebook.

turn on the notebook. When you do this for the first time, it will display

a Fujitsu logo on the screen. If you do nothing the system will load

the operating system, and then the Windows Welcome will begin.

Windows

Fujitsu End User License Agreement to proceed.

secure place.

TWO MINUTES.

THIS STAGE.

website at us.fujitsu.com/solutions.

to register online.

It is critical that you run Click Me! to install

necessary applications, utilities and drivers.

on the desktop. This process can take up to 15-20 minutes.

is otherwise connected to the Internet.

prompts you to run Click Me!. If you choose not run Click Me!

at this time, the Click Me! icon will remain on your desktop.

build the icon tray in the bottom right of the screen. Other utilities

(e.g. Bluetooth) and drivers may be installed. Icons will be created

that provide links to application/utilities that you will frequently

access. Once Click Me! is completed the system will reboot.

Licensing Agreement and the

(For Additional

Applications

and Utilities)

"Click me!"