Brother PT-P710BT Посібник з швидкого налаштування - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Виробник етикеток Brother PT-P710BT. Brother PT-P710BT 17 сторінок.
Також для Brother PT-P710BT: Посібник користувача (25 сторінок), Посібник з швидкого налаштування (17 сторінок), Посібник із швидкого старту (2 сторінок)

4. Charge the Battery

USB Port (on computer)

5 V DC, 0.5 A – 2 A

USB AC Adapter (not included)

5 V DC, 0.5 A – 2 A

• Charge the battery in environments between 50°F and 95°F / 10°C and

35°C, otherwise the battery will not charge, and the Battery LED will

remain lit.

• If the label printer is used to print, feed, or perform another operation

while charging, charging may stop even though the battery is not fully

charged. Charging resumes when the operation is completed.

To ensure the highest performance and longest life from the rechargeable

Li-ion Battery, when storing the label printer for a long period of time:

• Charge once every six months.

• Store in a cool dry place out of direct sunlight, between 50°F and 95°F /

10°C and 35°C.

1. Pull out the protective sheet (first

time only).

2. Connect the label printer to the

computer using the included USB

cable, or connect the USB cable to

a USB AC Adapter suitable for

charging mobile devices, and plug

the adapter into a power source.

Charge until the Battery LED turns

off.

• Use the included USB cable.

• If charging the battery using

a computer, make sure the

computer is on.