AEG L61470WDBI Посібник користувача - Сторінка 34
Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина AEG L61470WDBI. AEG L61470WDBI 40 сторінок.
Також для AEG L61470WDBI: Посібник користувача (36 сторінок)
Друкувати сторінку
34
www.aeg.com
16.6 Preparation and assembly of the door
16-22 mm
Ø 35 mm
14 mm
416
mm
22±1,5 mm
595-598 mm
2
1
A
B
The appliance is originally pre-arranged for
the assembly of a door opening from right to
left.
Door
The dimensions of the door should be:
• width 595 - 598 mm
• thickness 16-22 mm
X
• the height X depends on the height of the
adjacent furniture's base.
Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth12.5-14 mm
depending on the depth of door furniture) on
the inner side of the door.
The distance between the holes hobs fixing
centres must be 416 mm. The distance from
upper edge of the door to the centre of the
hole depends on the adjacent furniture's
dimensions.
The hinges will be fixed to the door by means
of screws for wood 1 and 2 supplied with the
appliance.
Mounting the door
WARNING!
Do not remove the screw B.
Fix the hinges to the appliance by means of
the M5x15 screws.
The hinges can be adjusted to compensate
for possible uneven thickness of the door.
To align the door perfectly it is necessary to
loosen the screw , adjust the door and
tighten the screw A again.