Brother QL-720NW Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Brother QL-720NW. Brother QL-720NW 23 сторінки. Label printer
Також для Brother QL-720NW: Посібник користувача мережі (48 сторінок), Посібник користувача програмного забезпечення (48 сторінок), Посібник користувача (23 сторінок), Посібник з швидкого налаштування (38 сторінок)

Друкувати сторінку

Problem

The printed bar code cannot be

read.

I want to reset the printer/delete

the data transferred from the

PC/Mac.

I want to cancel the current

printing job.

• Set the label vertical to the print head as shown below.

Label exit slot

Print head

• Some types of scanner are not able to read the bar code. Try

using another scanner.

• We recommend printing the Bar code with Print Quality options

set to "Give priority to print quality".

Windows

XP:

To change the Print Quality options, open the printer properties

by going to [Control Panel] - [Printers and Other Hardware] -

[Printers and Faxes], right-clicking the printer whose settings are

to be changed, then selecting [Properties]. Then, in the [General]

tab, click [Printing Preferences...].

Windows Vista

To change the Print Quality options, open the printer properties

by going to [Control Panel] - [Hardware and Sound] - [Printers],

right-clicking the printer whose settings are to be changed, then

selecting [Properties]. Then, in the [General] tab, click [Printing

Preferences...].

Windows

To change the Print Quality options, open the printer properties

by going to

- [Devices and Printers], right-clicking the printer

whose settings are to be changed, and selecting [Printer

properties]. Then, in the [General] tab, click [Preferences...].

Mac OS X 10.5.8 - 10.7:

To change the Print Quality options, use the [Basic] tab in the

printer properties.

Press and hold the Cut button while holding down the ON/OFF

button when the machine is turned off. When the Wi-Fi lamp

starts flashing and the Status lamp lights orange, press the Cut

button six times while continuing to hold down the ON/OFF

button. The machine will then reset. All data transferred from the

PC/Mac will be deleted and the machine will be reset to factory

settings.

• Make sure that the printer is ON, and press ON/OFF button.

Solution

Recommended

print direction