Fujitsu Lifebook UH900 Початок роботи - Сторінка 3

Переглянути онлайн або завантажити pdf Початок роботи для Ноутбук Fujitsu Lifebook UH900. Fujitsu Lifebook UH900 8 сторінок. Mini-notebook
Також для Fujitsu Lifebook UH900: Технічні характеристики (2 сторінок), Інструкція з експлуатації (2 сторінок)

Друкувати сторінку

Initial Start Up

Display Cover

DC ouput Cable

Wireless LAn/Bluetooth Switch

External monitor/LAn Adapter Cable Connector

Power/Suspend/resume Button

1. open the Display Panel

2. Connect AC Power

3. Connect to Internet or network

4. Booting the System

DC Power Jack

AC Cable

AC Adapter

5. Installing Click me!

6. registering Your fujitsu notebook

7. Calibrating the touch Screen

• Ensure that your notebook is on a hard level surface and that the air

vents are not blocked.

• Lift the display, being careful not to touch the screen.

• Adjust the display until it is at a comfortable viewing angle.

• Plug the power cord into the AC adapter.

• Plug the AC adapter into your notebook.

• Connect the power cord to an electrical outlet.

• Connect the External Monitor/LAN Adapter cable to the LAN jack on your

notebook and to a wall jack or to an Ethernet router.

Important:

• During the setup procedure, do not disconnect the power supply,

press any buttons, or use any peripheral devices.

• You should not attach any external devices until you have gone through

the initial power on sequence.

The Lithium ion battery is not charged upon purchase.

Initially you will need to connect either the AC adapter

or the Auto/Airline adapter to use your notebook.

Be careful when you select the language.

The only way to change the language

is to do a recovery process.

• Press the Suspend/Resume/Power button (above the keyboard) to turn on

the notebook. When you do this for the first time, it will display a Fujitsu

logo on the screen. If you do nothing the system will load the operating

system, and then the Windows Welcome will begin.

• Before installing the ClickMe! Utility, be sure

the wireless LAN switch is on or you are

connected to a LAN by using your External

Monitor/LAN adapter cable.

• The first time you boot up your system, you will see a "Primary

Settings for the PC" window. This window explains the installations

which will be performed by the ClickMe! utility. If you click [Execute],

ClickMe! will begin installing. If after clicking the button you receive a

"User Account Control" window, you will be asked for your permission

to continue. Click [Continue] to continue. If you cancel the operation,

the ClickMe! icon will appear on your desktop for later installation.

• In additions to the utility and applications installed by ClickMe!, other

third-party applications may need to be installed from the included discs.

• Your system has a convenient tool called the Fujitsu Driver Update

(FDU) utility. With FDU, you can choose to automatically or manually

go to the Fujitsu site to check for new updates for your system. For

more information about the FDU utility, you should refer to "Automati-

cally Downloading Driver Updates" in your User's Guide (see step 7).

• Register your notebook with Fujitsu Service and Support via our

website at us.fujitsu.com/computers.

• You will need to be set up with an Internet Service Provider (ISP) to

IT IS HIGHLY RECOMMENDED THAT YOU CHECK

YOUR DRIVERS AND RESTORE DISC OR THE

FUJITSU SUPPORT SITE FOR THE LATEST TOUCH

PANEL DRIVER. THIS WILL ENSURE OPTIMAL

TOUCH FUNCTIONALITY OF YOUR DISPLAY.

• For accurate tracking between your fingertip or stylus and the cursor,

you must run the Tablet Calibration utility before you use the Touch

Screen for the first time, or after you change the display resolution.

To run the calibration utility:

• Go to Start -> Control Panel.

• In the View by: field, select either Large icons or Small icons.

• Click the Tablet Calibration icon.

for

Additional

Latest

Utilities

Drivers

"Click me!"

(fDU)