Brother QL-800 Посібник з швидкого налаштування - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Виробник етикеток Brother QL-800. Brother QL-800 10 сторінок. Dk label. dk tape
Також для Brother QL-800: Посібник з швидкого налаштування (10 сторінок), Посібник з безпеки продукції (11 сторінок)

Друкувати сторінку

8. Printing Using a Computer (P-touch Editor Lite)

1. Turn the Label Printer On, then press and hold the P-touch Editor

Lite Button until the green P-touch Editor Lite LED turns on.

NOTE

P-touch Editor Lite is set as the default mode.

2. Connect the USB Cable to your computer.

NOTE

If you are connecting the Label Printer using a USB Cable, it may not be detected

correctly. If this happens, unplug the USB Cable, make sure the Label Printer is On,

and then reconnect the USB Cable.

3. After the USB Cable is connected, a dialog box appears on your

computer monitor.

(The following screens may differ depending on your operating

system, but the operating procedures are same.)

Windows Vista

Windows

7 / 8 / 8.1 / 10

Click Open folder to view files.

Editor Lite LED

Editor Lite Button

Click P-touch Editor Lite.

Double-click PTLITE10.

8. Printing Using a Computer (P-touch Editor Lite) (cont)

NOTE

• If you do not see the dialog box, it may be hidden behind an open software

program window. Minimize all windows to view the dialog box.

• It will take longer than usual to start P-touch Editor Lite when connecting the Label

Printer to your computer for the first time. If the software does not start

automatically when you connect the Label Printer, you may launch it from My

Computer. Start P-touch Editor Lite by double-clicking PTLITE10.EXE.

 When using Windows Vista

When connecting the device for the first time, perform the scan and then select the

Always do this for software and games check box on the dialog box displayed

when the scan completes. P-touch Editor Lite will start automatically the next time

you connect the QL-800.

4. P-touch Editor Lite launches.

IMPORTANT

Do not turn off or disconnect the Label Printer while using P-touch Editor Lite.

 When using Macintosh

P-touch Editor Lite is not available for Macintosh. The [QL-800] icon is displayed

when the Label Printer is connected to a Mac in the P-touch Editor Lite mode. Open

[QL-800] from the desktop, and then execute [Start Here Mac]. If P-touch Editor 5.1

and the Label Printer drivers are not installed, a message advising to install is

displayed. Install them, and use P-touch Editor 5.1.

NOTE

For more information and instructions on how to use the P-touch Editor Lite, see the

User's Guide.