Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz Посібник з біосу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з біосу для Ноутбук Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz. Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz 27 сторінок. P1620 getting started guide
Також для Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz: Простий посібник (37 сторінок), Початок роботи (2 сторінок)
Друкувати сторінку
L i f e B o o k P 1 6 0 0 N o t e b o o k B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies which ATA devices are
installed.
Main
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field
Options
■
Type:
Auto
■
None
LBA Format
Total Sectors:
---
---
Maximum
Capacity:
■
Multi-Sector
Disabled
Transfers:
■
2 Sectors
■
4 Sectors
■
8 Sectors
■
16 Sectors
6
PhoenixBIOS Setup Utility
Advanced
Security
Drive0 [TOSHIBA MK4009GAL]
[Auto]
LBA Format
78140160
40008MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 2. Drive0 Submenu
Default
[Auto]
---
---
[16 Sectors]
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Power
Boot
Info
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
Select
Sub-Menu
Description
Selects the Serial ATA/IDE device type. Select Auto to have the type auto-
matically identified by the BIOS at POST. If None is selected, all of the fol-
lowing Set-up items do not appear.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Specifies the number of sec-
tors per block for multiple sector transfer.
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit