Fujitsu BS2000 SE Series Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Сервер Fujitsu BS2000 SE Series. Fujitsu BS2000 SE Series 25 сторінок. Server unit x86
Також для Fujitsu BS2000 SE Series: Короткий посібник (43 сторінок), Посібник (42 сторінок), Посібник з експлуатації (22 сторінок), Посібник з експлуатації (20 сторінок)

1 Introduction

The FUJITSU Server BS2000 SE series is the continuation and integration of technologies from the previous Fujitsu

mainframe lines of the S and SQ series as regards hardware architecture and software functions. Designed as

hybrid systems, the SE servers bring a high quality of openness and integration ability from various server and

peripheral systems together with comprehensive, cross-system manageability.

Depending on requirements, an SE server contains all the system components needed for operation as an overall

application:

/390-based BS2000 Server Unit

x86-based Server Unit with BS2000 guest systems

x86-based Application Units for operating Native or hypervisor systems (e.g. Linux, Windows, VMware, OVM,

etc.)

Net Unit as a high-speed, server-internal infrastructure to connect the components with each other and with the

customer's IP networks

Shareable tape and disk periphery

Infrastructure to connect the components with the customer's FC networks

Information on the hardware lifecycle of the FUJITSU Server BS2000 SE Series (Changes

since the last edition of the manual)

With the hardware lifecycle of the SE Series, the hardware basis for the Server Unit x86, the Management Unit and

the HNC has been renewed several times. If the following generations are not identified by their own designations

(e.g. SU300 SU300B SU310 SU320), the generations are identified by a subsequent Mx with x = 1,2,3,...: MU

M2, MU M3, HNC M2, HNC M3 etc. The generation M2 is supported as of SE V6.2A, the generation M3 as of

version 6.3A04.

The changes in the manuals are mainly due to these new hardware lifecycle generation models. Any differences to

the previous models regarding structure and operation are described in detail.

Information on using the manual

The Operating Manual consists of a number of modules and describes the features and hardware components of

the FUJITSU BS2000 servers of the SE series. Users should read the operating manuals carefully in order to obtain

optimal performance from the SE server.

This manual describes the hardware component Server Unit x86 and complements the Basic Operating Manual [ ].

You will find a comprehensive introductory chapter in the Basic Operating Manual. The chapters "Important notes"

on SE server operation and "Environmental protection and service" are contained only in the Basic Operating

Manual.

In the following, abbreviations are used to describe the SE server models and their components. These are

explained in the introduction to the Basic Operating Manual [ ] in the section "Models, Names, Abbreviations".