Fujitsu PRIMERGY 10/40GbE Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Сервер Fujitsu PRIMERGY 10/40GbE. Fujitsu PRIMERGY 10/40GbE 23 сторінки. Connection blade 18/8+2

Друкувати сторінку

2.7.4

Backup/Restore configuration

We can backup the configuration to server or restore it by downloading configuration file from server. FTP

or TFTP protocol can be used. FTP server function is activated in this product. Therefore, we can access it by

FTP client and put or get its configuration to backup or restore. We can backup or restore the configuration

by copy command on CLI if using TFTP server.

Backup by FTP server can be done as following. (This example is on Window OS command prompt.)

C:<config>ftp△192.168.1.10 #Connect with FTP to Connection Blade

User (192.168.1.100:(none)): admin

331 Password required for admin.

Password:

230 User admin logged in.

ftp> bin

200 Type set to I

ftp>get△config1△config1-1

・

ftp>bye

221 Goodbye

C:<config>

Restore by FTP server can be done as following. (This example is on Window OS command prompt.)

C:<config>ftp△192.168.1.10

Blade

User (192.168.1.100:(none)): admin

331 Password required for admin.

Password:admin

230 User admin logged in.

ftp> bin

200 Type set to I

ftp>put△config1-1△config1

・

226 Write complete

2856 bytes sent in 1.10 seconds (2.44 Kbytes/s)

ftp>get△reset

・

ftp>bye

221 Goodbye

C:<config>

PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide

#Enter User Name

#Enter Password

#Change to binary mode

#backup config1 to config1-1 file

#exit FTP access

#Connect with FTP to Connection

#Enter User Name

#Enter Password

#Change to binary mode

#Restore config1-1 to config1

#Restart connection blade

#exit FTP access

Page 12 / 23