Fujitsu PRIMERGY B900 Довідковий посібник - Сторінка 34
Переглянути онлайн або завантажити pdf Довідковий посібник для Сервер Fujitsu PRIMERGY B900. Fujitsu PRIMERGY B900 36 сторінок. Blade server systems, contents of the mmb s1 help system
Друкувати сторінку
Settings
Event Log function.
Management Blade Event Log: Enables/disables the management blade's Wrap
•
Around Event Log function.
Mail Configuration
Email Alerting
•
Enable Alarm Mail: Enables/disables the mail alert function.
o
Mail Format: Sets the Mail Format (ITS-Format or REMCS).
o
Global Email Paging Configuration
•
SMTP Retry (0 - 7): Sets the retry count (0 - 7) if the SMTP server
o
response failed.
SMTP Retry Delay (0 - 255): Sets the retry interval in seconds if the
o
SMTP server response failed.
Primary/Secondary SMTP Server Configuration
•
SMTP Server: Sets the domain name or IP address of the SMTP server.
o
SMTP Port (1 - 65535): Sets the port number of the SMTP server.
o
Auth Type: Selects the authentication type. Auth-Login, Auth-Plain and
o
Auth-Cram-md5 are supported.
AUTH User Name: Enter the authentication user name.
o
AUTH Password: Enter the authentication password.
o
Email-Format-dependent Configuration: The user can configure the sender
•
email address, administrator name and phone number here. Up to 5 user email
addresses that can be modified are supported.
Date/Time
Controller Time
Sets the date and time for the MMB. The format is (MM/DD/YYYY) and
•
(HH:MM:SS).
Time Zone
Sets the time zone for this system.
•
Network Time Protocol
Enable NTP: Enables/disables the NTP function.
•
NTP Server 1: Enter the NTP server IP address.
•
NTP Server 2: Enter an alternative NTP server IP address (if Redundancy is set,
•
the MMB takes this second address if the first one cannot be reached).
Sync Mode: There are two sync modes available:
•
Sync Afterward: Only when the management blade time is ahead of the NTP
server time will the management blade synchronize the time from the NTP
server.
Sync Always: The management blade always synchronizes the time from the
NTP server.
Last Sync Date/Time: Displays the latest date/time that the management blade
•
34