Fujitsu Primergy BX620 S2 Посібник з конфігурації системи та інформації про замовлення - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник з конфігурації системи та інформації про замовлення для Сервер Fujitsu Primergy BX620 S2. Fujitsu Primergy BX620 S2 18 сторінок.
PRIMERGY BX620 S2 / BX620 S3
BX600 S2 Blade Server System Unit
LAN/Fibre Channel Interfaces ( Use of Network Blade Slot 3,4 )
Network Blade
Slots
Max: 2 Blades
Notes on GbE Pass-Thru Blade (PG-LNB101)
* To connect to hub/router through GbE Pass-Thru Blade, it is necessary to connect to the port of 1000BASE-T(fixed).
In case that the port of 10/100BASE-TX is connected, communication cannot be established.
Notes on GbE Pass-Thru Blade (PG-LNB101)
* The max number of available ports under initial condition is as follows.
internal : 8ports
external : 4ports
* If it is necessary to connect more than 8 BX620 S2/BX620 S3, FCSW Upgrade kit:Porton Demand(PG-FCSU102) is required to increase available ports.
Switch Blade
PG-SW104
PGBSW1042 (for CTO)
(for Network Blade Slot 3)
PGBSW1043 (for CTO)
(for Network Blade Slot 4)
Switch Blade
( 1000BASE-T )
PG-SW105
PGBSW1052 (for CTO)
( 10GBASE-SR )
(for Network Blade Slot 3)
PGBSW1053 (for CTO)
(for Network Blade Slot 4)
( 10GBASE-CX4 )
GbE Pass-Thru Blade
PG-LNB101
PGBLNB1012 (for CTO)
(for Network Blade Slot 3)
PGBLNB1013 (for CTO)
(for Network Blade Slot 4)
FC Switch Blade
PG-FCS102
PGBFCS102 (for CTO)
(for Network Blade Slot 3)
PGBFCS1022 (for CTO)
(for Network Blade Slot 4)
FCSW Upgrade kit:Porton Demand
( internal : 8 ports -> 10 ports
external : 4ports -> 6ports )
PG-FCSU102
FCSW Upgrade kit:ISL Trunking
PG-FCSU103
FC Pass-Thru Blade
PG-FCB101
PGBFCB101 (for CTO)
(for Network Blade Slot 3)
PGBFCB1012 (for CTO)
(for Network Blade Slot 4)
Twist Pair Cable (category 5e)
Twist Pair Cable (category 5e)
XFP Module
Multi Mode Fibre Channel Cable
PG-XFPS01
IB Cable
Twist Pair Cable (category 5e)
SFP Module
Multi Mode Fibre Channel Cable
PG-SFPS02
SFP Module
Multi Mode Fibre Channel Cable
PG-SFPS01