Fujitsu PRIMERGY BX920 S1 Посібник з опцій - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з опцій для Сервер Fujitsu PRIMERGY BX920 S1. Fujitsu PRIMERGY BX920 S1 32 сторінки.

Preface

1.3

Extensions and conversions

Second processor

If only one processor is installed in your server blade, you can add a second

processor to it. You may only use processors of the same type. The second

processor must have the same clock frequency as the first.

Main memory expansion

The system board has a total of 9 slots for memory modules. Of these, 6 slots

are for CPU 1 and 3 slots for CPU 2.

In total, the system board supports up to 72 GB main memory. Memory

modules with a capacity of 1 GB, 2 GB, 4 GB or 8 GB can be used.

Both registered DDR 3 memory modules (RDIMM) and unbuffered DDR 3

memory modules (UDIMM) are permitted. However, you must not use a mixture

of these two module types.

You can find detailed information on the main memory in the technical

manual for the D2680 system board.

Optional I/O modules (mezzanine cards)

The server blade has two slots for expansion boards (known as mezzanine

cards), which can each provide two Fibre Channel connections or four

additional Ethernet connections.

You can choose from the following I/O modules:

– 8 Gbit Fibre Channel mezzanine card with 2 port (PCIe x8)

– 1 Gbit Ethernet mezzanine card with 4 ports (PCIe x4)

You will find a description on how to install or exchange mezzanine cards

in the "PRIMERGY BX920 S1 Server Service Supplement" manual.

BX920 S1

Extensions and conversions

Options Guide