Fujitsu PRIMERGY CX122 S1 Посібник з експлуатації - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Сервер Fujitsu PRIMERGY CX122 S1. Fujitsu PRIMERGY CX122 S1 50 сторінок.

If necessary, have other people help you mount the individual

components in the rack because of the weight involved.

Install only system expansions that satisfy the requirements and rules

governing safety. If you install other expansions, you may damage the

system or violate these safety regulations. Information can be

obtained from customer service or your local sales office.

The AC main power connection for the PRIMERGY CX1000 system

unit must be installed by an authorized electrician approved by the

local utility company.

Installation and operation

CAUTION!

General

Make sure that no objects (e.g. jewelry, paperclips etc.) or liquids can

get inside the server (risk of electric shock, short circuit).

Data cables must be adequately shielded.

The EN 50173 and EN 50174-1/2 standards apply for LAN cabling.

The minimum requirement is the use of a category 5 screened LAN

cable for 10/100 Mbit/s Ethernet, or a category 5e cable for Gigabit

Ethernet. The requirements from the ISO/IEC 11801 specification

must also be met.

Route the cables in such a way that they do not create a potential

hazard (make sure no-one can trip over them) and that they cannot

be damaged. When connecting the server, refer to the relevant

instructions in this manual.

Never connect or disconnect data transmission lines during a storm

(risk of lightning strike).

In emergencies (e.g. damaged casing, controls or cables, penetration

of liquids or foreign bodies), switch off the server immediately, remove

all power plugs and contact your sales outlet or customer service

team.

CX122 S1

Operating Manual

Safety instructions