AEG L88489FL Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина AEG L88489FL. AEG L88489FL 36 сторінок.
![AEG L88489FL Посібник користувача](/uploads/products/server2/242844/242844.jpg)
EXTRA RINSE BUTTON
Press button
7
to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
THE STAIN-PREWASH
BUTTON
8
Press button
to add the stain and/or
8
a prewash phase to a programme.
Press the button again and again to ac-
tivate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with
hard stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this func-
tion when you have laundry with a
high level of soil.
The set of this function increa-
ses the programme duration.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
7
.
9
TEMPERATURE BUTTON
Press button
10
to change the default
temperature. When the display shows
- -, the appliance does not heat the
water.
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button
at the same time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
only when you press the buttons
and when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, press button
1
and button
2
until the display shows the symbol
.
• To deactivate the function, press but-
ton
1
and button
time until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
: the appliance cannot start.
4
• After you press the Start/Pause but-
ton
, all the buttons and the pro-
4
gramme knob are deactivated.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the ex-
tra rinse function permanently on when
you set a new programme.
• To activate the function press button
and button
5
6
ENGLISH
11
10
3
and button
4
at the same time
2
at the same
goes off.
at the same time