Fujitsu Primergy RX100 S3 Посібник із сервісного доповнення - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник із сервісного доповнення для Сервер Fujitsu Primergy RX100 S3. Fujitsu Primergy RX100 S3 45 сторінок.
Також для Fujitsu Primergy RX100 S3: Посібник з експлуатації (9 сторінок)
Друкувати сторінку
2
Procedure
V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Ê First of all please familiarize yourself with the safety instructions in the
section chapter "Safety notes" on page 11 et seqq. .
Ê Ensure that all required manuals (see Service DVD) are available, printing
out the PDF files if necessary. You will definitely need the Operating Manual
for the server, the Options Guide for the server and the Technical Manual for
the system board.
Ê Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the chapter "Replacement routines" on
page 17 et seqq. .
Ê Replace the defective component as described in the relevant chapter.
Ê Close the server.
Ê Connect the cables.
Ê Connect the server to the power outlet.
Ê Start the operating system.
Ê If necessary, configure the server as required.
1
This procedures are described in the Operating Manual.
RX100 S3
1
1
1
Service Supplement
1
1
9