Fujitsu SPARC Enterprise M8000 Примітки до продукту - Сторінка 25

Переглянути онлайн або завантажити pdf Примітки до продукту для Сервер Fujitsu SPARC Enterprise M8000. Fujitsu SPARC Enterprise M8000 44 сторінки. For xcp version 1041
Також для Fujitsu SPARC Enterprise M8000: Посібник для початківців (4 сторінок), Посібник з експлуатації (30 сторінок), Додатковий посібник (36 сторінок)

LED Error Display

The following content will be added to the SPARC Enterprise M8000/M9000 Servers

Service Manual., Section 2.6, "LED Error Display," TABLE 2-11 Status Display of LEDs

Defined Individually for Each FRU.

Status Display of LEDs Defined Individually for Each FRU

TABLE 4

FRU

LED

Type

HDD

READY

CHECK

Updates of the SPARC Enterprise M8000/M9000

Servers Site Planning Guide

The following information supersedes the information in the SPARC Enterprise

M8000/M9000 Servers Site Planning Guide.

This is to correct the description in the SPARC Enterprise M8000/M9000 Servers Site

Planning Guide, Section 2.3.1, "Cooling (Air-Conditioning) Requirements."

Meaning

Display

Lit (green)

Indicates that the HDD is in operation. In this state, the HDD cannot be

removed (cannot be replaced).

Blinking

Indicates that the HDD is being accessed. In this state, the HDD cannot

(green)

be removed (cannot be replaced).

Off

Indicates that the HDD can be replaced.

Lit (amber)

Indicates that an error was detected in the HDD. However, this LED

remains on for a few minutes immediately after power-on (until the

start of initialization). It does not indicate an error during that time.

Blinking

Indicates that the HDD is a replacement target.

(amber)

Off

Indicates that the HDD is in the normal state.

SPARC Enterprise M8000/M9000 Servers Product Notes