Brother MFC-215C Посібник з швидкого налаштування - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Факсимільний апарат Brother MFC-215C. Brother MFC-215C 40 сторінок. Brother mfc-215c: quick start
Також для Brother MFC-215C: Посібник з швидкого налаштування (35 сторінок)
Друкувати сторінку
Step 1
4
Take out the ink cartridge.
5
Carefully remove the bottom cap.
Opening
If the cartridge cover comes off when you
open the bag the cartridge will not be
damaged.
Keep the ink cartridge in an upright position
when you insert it into the slot.
OK
OK
OK
4
Setting Up the Machine
6
Press down on the ink cartridge until the
hook snaps over it, taking care to match the
slot colour (A) with the cartridge colour (B),
as shown in the diagram below.
(A)
OK
OK
OK
7
Lift the scanner cover to release the lock.
Gently push the scanner cover support
down and close the scanner cover.
If
shows on the LCD after you
Install
install the ink cartridges, check to make sure
the ink cartridges are installed correctly.
The machine will clean the ink tube system
for use for the first time. This process will
occur only once, the first time ink cartridges
are installed. The cleaning process will last
approximately four minutes.
The LCD shows:
Preparing System
Approx 4 Minutes
(B)