Brother MFC-5840CN Посібник з швидкого налаштування - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Факсимільний апарат Brother MFC-5840CN. Brother MFC-5840CN 39 сторінок. Brother internet fax user's guide
Також для Brother MFC-5840CN: Посібник з швидкого налаштування (37 сторінок), Посібник користувача (44 сторінок), Посібник з експлуатації (8 сторінок)

Step 1

Gently insert the paper into the paper tray

print side down and the leading edge (top of

the paper) in first.

Check that the paper is flat in the tray and

below the maximum paper mark.

Make sure the paper side guides and length

guide touch the sides of the paper.

Put the paper tray firmly back into the MFC.

Only for MFC-5840CN, see "To load paper

in the paper tray#2 (MFC-5840CN only)" in

Chapter 1 of the User's Guide.

Setting Up the Machine

Maximum Paper Mark

Installing the Phone Line

and Power Cord

Connect the power cord.

Connect the telephone line cord.

Connect one end of the telephone line cord

to the jack on the machine marked LINE

and the other end to a modular wall jack.

DO NOT connect the USB cable yet.

Warning

■ The MFC must be connected to a grounded/

earthed plug.

■ Since the MFC is grounded through the power

outlet, you can protect yourself from potentially

hazardous electrical conditions on the telephone

network by keeping the power switched on when

you connect the MFC to a telephone line. Similarly,

you can protect yourself when you want to move

your MFC by disconnecting the telephone line first

and then the power cord.