Fujitsu fi-5530C - Document Scanner Початок роботи - Сторінка 13

Переглянути онлайн або завантажити pdf Початок роботи для Сканер Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 28 сторінок. Color departmental scanner
Також для Fujitsu fi-5530C - Document Scanner: Посібник з інсталяції Посібник з інсталяції (7 сторінок), Посібник з інсталяції Посібник з інсталяції (9 сторінок), Процедури встановлення (3 сторінок), Початок роботи (28 сторінок), Брошура та технічні характеристики (2 сторінок), Технічні характеристики (2 сторінок), Інструкції із заміни витратних матеріалів та очищення (14 сторінок), Інструкція з очищення Посібник з очищення (13 сторінок), Інструкція з експлуатації (10 сторінок)

Друкувати сторінку

Fujitsu fi-5530C - Document Scanner Початок роботи

2.3 Installing the Scanner

Application

For scanning documents with this scanner, both scanner

driver and image capturing application software (called

"application" hereafter) must be installed on your PC.

The following scanner drivers and applications are pro-

vided:

• Scanner Driver:

FUJITSU TWAIN 32 Scanner Driver

FUJITSU ISIS Scanner Driver

• Scanning application:

ScandAll 21 (for FUJITSU TWAIN 32)

QuickScan Pro

Install the appropiate scanner driver for the application

you will use. The following sections descri be installa-

tion of each driver and application.

For FUJITSU TWAIN32 Scanner Driver

■ Preparation

Confirm the following items before installing the appli-

cation.

• Take out the Setup CD-ROM from its pack-

age, but do not insert the Setup CD-ROM

into the CD driver yet.

• Connect the scanner correctly to your PC.

For details on how to connect the scanner,

HINT

refer to "2.2 Connecting the Scanner to

Your PC" on page 3.

• Uninstall any older versions of FUJITSU

TWAIN 32 driver if it has already been

installed.

Uninstall [Scanner Utility for Microsoft Win-

ATTENTION

dows] from [Add/Remove Programs] on

the control panel.

• There are two types of FUJITSU TWAIN 32:

One of the following driver software will be

automatically installed according to your Oper-

ating System (OS).

For Windows 98, Windows Me, Windows

2000, and Windows XP:

FUJITSU TWAIN32 V9

For Windows 95, Windows NT 4.0:

(for FUJITSU ISIS)

fi-5530C Image Scanner Getting Started

FUJITSU TWAIN32 V8

• When using Windows 95 or Windows NT

4.0:

ASPI Manager V4.01 or later is required (gener-

ally comes with SCSI board products).

■ Installing the FUJITSU TWAIN32

Scanner Driver

Windows XP screenshots are used in this

HINT

section. The windows and operations may

slightly vary depending on your OS.

1. Press the power button to turn ON the scanner.

2. Turn on your PC and log on to Windows.

When using Windows NT 4.0, Windows

ATTENTION

2000 or Windows XP, log on as a user with

"Administrator" privileges.

3. If the scanner is automatically detected,

[Found New Hardware Wizard] or [Add/

Remove Hardware Wizard] dialog box will

appear. Click [Cancel] to close the Wizard win-

dow.

4. Insert the Setup CD-ROM into the CD drive.

⇒

appears.

This screen may not appear when the

ATTENTION

"Autoplay" setting of your CD drive is off.

In this case, run "Install.exe" in this CD-

ROM directly from "Explorer" or "My Com-

puter".