Fujitsu FI-6670A Посібник з інсталяції Посібник з інсталяції - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з інсталяції Посібник з інсталяції для Сканер Fujitsu FI-6670A. Fujitsu FI-6670A 6 сторінок. High speed colour duplex scanner
Також для Fujitsu FI-6670A: Посібник користувача (26 сторінок), Технічні характеристики (2 сторінок), Інструкції із заміни витратних матеріалів та очищення (22 сторінок)

Fujitsu FI-6670A Посібник з інсталяції Посібник з інсталяції
Fujitsu SCSI Scanner Installation Procedures
Step C: Installing the drivers from the Setup CD.
To begin it is recommended that you install the drivers first before connecting the scanner.
Installing the STI-Twain driver.
1. Insert the Scanner Setup CD into your CD Rom.
2. Next please complete the pre-registration box when it appears and click the submit
button.
3. Afterwards close your browser and click the Install Products button on the Scanner
Setup Menu.
4. On the next screen click on Twain Driver and you may be presented with the option
to install the Error Recovery Guide.
5. After you have installed the Error Recovery Guide (or not) follow the prompts to
complete the twain driver installation.
6. Do not reboot at this time!
Installing the ASPI-Twain driver.
Some of our scanners are not supported by the STI-Twain drivers. For those units you
must install the ASPI-Twain driver. Please refer to the driver download page to see if
your model is one of them.
7. Insert the Scanner Setup CD into your CD Rom.
8. Next please complete the pre-registration box when it appears and click the submit
button.
9. Afterwards close your browser and click the Install Products button on the Scanner
Setup Menu.
10. On the next screen click on Twain Driver and you may be presented with the option
to install the Error Recovery Guide.
11. After you have installed the Error Recovery Guide (or not) follow the prompts to
complete the twain driver installation.
12. Do not reboot at this time!
Installing the ISIS driver.
13. Next go back to the Scanner Setup Menu and click on ISIS Driver.
14. If you didn't install the Error Recovery Guide during the Twain driver installation you
will be asked again. Proceed and follow the prompts to complete the ISIS driver
installation.
15. Do not reboot at this time!
Installing ScandAll Pro.
16. Back to the Scanner Setup Menu and click on ScandAll Pro.
17. The ScandAll 21 installation wizard will appear. Click next and follow the prompts to
complete the installation.
18. Once all of the above is completed then remove the Scanner Setup CD, Reboot
your system, and go to Step E.
Rev082708A
Windows 95\98\98SE\ME\2000\XP\Vista
Page 2 of 2